FluDyn Pumps > Spare Parts > Product Search (Beta – filters on sidebar)

Article Search (Beta – filters on sidebar)

Select your spare parts requirements from the list below and send us a non-binding enquiry. Of course you can put together your inquiry basket for several pump models.

If you are missing an item, please get in touch with us by phone or e-mail.

The filter should be here:

Pump manufacturer

Bauart

Baureihe

Baugröße

Stufenzahl

Modell

Produktgruppe

Aktive Filter

<- Here it is at the end

Reset

Artikel 401 - 500 von 2175

Seite 5 von 22

Pos Thumbnail Products (click for details:) Options Product enquiry
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E2H 6300 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint E2H 6300, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EH 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4H 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 4500 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 4500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2H 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 600, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E2H 4500 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint E2H 4500, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 164 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint EH 164, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 6300.1 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 6300.1, pre-assembled
The joint is pre-assembled and ready to use.
216.1
The assembly kit joint for Bornemann E4H 2650 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting Kit Joint E4H 2650
Small parts for mounting a joint
216.1
The mounting kit joint for Bornemann EH 1500 contains various small parts that are required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1500
Small parts for fitting a joint
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E4H 236 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint E4H 236, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EL 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann EL 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann EL 236.2 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.2
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann EL 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EL 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann EL 375.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint for EL 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1024/630 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024/630, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1500.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1900.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann E2L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E2L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E2L 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1500.4 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1500.4, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann E4L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E4L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 375, pre-assembled
The joint is pre-assembled and ready to use.
216.1
Placeholder
Mounting kit joint EL 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1500.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 1500.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E4L 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2H 236
Small parts for mounting a joint
216
The picture shows a joint for Bornemann E2H 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 2650, pre-assembled
The joint is pre-assembled and ready to use.
216.1
Placeholder
Mounting kit joint E4H 236
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 1500 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 6300.1
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 600 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 375 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 375
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 6300
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 2650 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 2650
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1900
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E4H 164
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 2650 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 2650
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E2H 375 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 375
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1900
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 236
Small parts for fitting a joint
216.1
The joint assembly kit for the Bornemann E2H 1024 contains a variety of small parts that are required for the installation of a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1024
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 1900 contains various small parts that are required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1900
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 600 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 375 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 375
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 4500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 4500
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E2H 600 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1500 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 164
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 6300
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 6300.1
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1024 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1024
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 1024 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1024
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 164
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EL 164
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 375
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 375.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 600
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1024
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1024/630
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1900
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1900.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 2650
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 164
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 236
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 236.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 375
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 600
Small parts for fitting a joint
1 2 3 4 5 6 7 8 … 22
Reset

Artikel 401 - 500 von 2175

Seite 5 von 22

Pos Thumbnail Products (click for details:) Options Product enquiry
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E2H 6300 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint E2H 6300, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EH 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4H 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 4500 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 4500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2H 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 600, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E2H 4500 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint E2H 4500, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 164 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint EH 164, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4H 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EH 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 6300.1 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 6300.1, pre-assembled
The joint is pre-assembled and ready to use.
216.1
The assembly kit joint for Bornemann E4H 2650 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting Kit Joint E4H 2650
Small parts for mounting a joint
216.1
The mounting kit joint for Bornemann EH 1500 contains various small parts that are required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1500
Small parts for fitting a joint
216
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E4H 236 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint E4H 236, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EL 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann EL 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann EL 236.2 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.2
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann EL 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann EL 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann EL 375.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint for EL 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1024/630 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024/630, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1500.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 1900.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900.2, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann EL 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann E2L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E2L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E2L 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1500.4 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1500.4, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E4L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows the individual parts of a joint for Bornemann E4L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows the individual parts of a joint for Bornemann E4L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
The picture shows a joint for Bornemann E4L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 375, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
The picture shows a joint for Bornemann E2L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 375, pre-assembled
The joint is pre-assembled and ready to use.
216.1
Placeholder
Mounting kit joint EL 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1500.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 1500.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E4L 1500
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2H 236
Small parts for mounting a joint
216
The picture shows a joint for Bornemann E2H 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 2650, pre-assembled
The joint is pre-assembled and ready to use.
216.1
Placeholder
Mounting kit joint E4H 236
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 1500 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 6300.1
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 600 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 375 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 375
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 6300
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 2650 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 2650
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1900
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E4H 164
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 2650 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 2650
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E2H 375 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 375
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1900
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 236
Small parts for fitting a joint
216.1
The joint assembly kit for the Bornemann E2H 1024 contains a variety of small parts that are required for the installation of a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1024
Small parts for mounting a joint
216.1
The joint assembly kit for Bornemann E2H 1900 contains various small parts that are required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1900
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 600 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 375 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 375
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 4500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 4500
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E2H 600 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 600
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1500 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1500
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 164
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 6300
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EH 6300.1
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann E4H 1024 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1024
Small parts for mounting a joint
216.1
The assembly kit joint for Bornemann EH 1024 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1024
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint E2H 164
Small parts for mounting a joint
216.1
Placeholder
Mounting kit joint EL 164
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 236.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 375
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 375.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 600
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1024
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1024/630
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1900
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 1900.2
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint EL 2650
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 164
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 236
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 236.4
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 375
Small parts for fitting a joint
216.1
Placeholder
Mounting kit joint E2L 600
Small parts for fitting a joint
1 2 3 4 5 6 7 8 … 22

FluDyn Pumps GmbH is neither an agent or distributor of the companies mentioned, nor is it affiliated with them. Mentioned or shown company and brand names, company and trade marks and company logos are the property of the respective manufacturer or the owner of the trade mark or rights – FluDyn Pumps GmbH only uses these for comparative purposes to identify the purchased item.

Home

Contact

Site Notice

Privacy Policy