Contact

FLUDYN PUMPS GMBH

Dankerser Str. 23
31675 Bückeburg-Cammer
Germany

Phone

+49 (571) 889 185 – 50

Fax:

+49 (571) 889 185 – 51

Mail:

contact@fludyn-pumps.com

 

Downloads

Bornemann EH 1024

We are your contact for pump spare parts made in Germany. FluDyn Pumps stands for fair prices and top service.

Select your desired spare parts from the parts list below and send us a non-binding inquiry. Of course you can put together your inquiry basket for several pump models. If you are using a Bornemann pump that is not on our list, please contact us by phone or email .

The spare parts are 100% compatible with the original parts. They are produced according to our strict specifications and offer you high quality and reliability.

Pos. Picture Products (click for details:) Description Options Quantity Action
-
Two blue Fludyn BEH 1024 mono pumps without motor, mounted crosswise on a wooden pallet ready for despatch
Complete replacement pump designed to fit an original Bornemann EH 1024 progressing cavity pump / mono pump.
-
Placeholder
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
22
A blue stator for Bornemann EH 1024 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator for Bornemann EH 1024 progressive cavity pumps / mono pumps
Clear
11
A metal coupling rod for Bornemann EH 1024 progressive cavity pumps. It lies at an angle on a neutral white background. At the front left, one of the two joint connections is visible.
Clear
10
A metal rotor for EH 1024 pumps is tilted against a neutral background. On the left you can see the connection between the eccentric screw and the joint.
Single-stage rotor (eccentric screw) EH 1024
Clear
-
Placeholder
Small parts for attaching the rotor to the joint
216
Placeholder
The joint is pre-assembled and ready to use.
216.1
Placeholder
Small parts for mounting a joint
-
Placeholder
Contains all the parts required to replace a stuffing box / soft pack.
-
Placeholder
Spare parts to replace the mechanical seal
-
Placeholder
Stator, rotor and small parts
12
A metal drive shaft for Bornemann EH 1024 progressing cavity pumps lying at an angle with no background. The connection for the motor can be seen at the front.
Clear
1
A blue painted pump housing for a Bornemann EH 1024 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
2
A blue painted empty bearing housing for Bornemann EH 1024 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
3
Placeholder
4
Placeholder
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
15
Placeholder
14
Placeholder
17
Placeholder
18
Placeholder
20
Placeholder
24
Placeholder
25
Green gaskets in a range of sizes, laid one on top of the other.
27
Placeholder
28
Placeholder
29
Placeholder
31
Placeholder
32
Placeholder
33
Placeholder
36
Placeholder
41
Placeholder
42
Placeholder
43
Placeholder
44
Placeholder
45
Placeholder
46
Placeholder
46.1
Placeholder
47
Placeholder
47.1
Placeholder
49
Placeholder
50
Placeholder
51
Placeholder
52
Placeholder
55
Placeholder
56
Placeholder
68
Placeholder
184
Placeholder
200
Placeholder
213
Placeholder
214
Placeholder
215
Placeholder
219
Placeholder
221
Placeholder
222
Placeholder
235
Placeholder
272
Placeholder

Pos. Picture Products (click for details:) Description Options Quantity Action
-
Two blue Fludyn BEH 1024 mono pumps without motor, mounted crosswise on a wooden pallet ready for despatch
Complete replacement pump designed to fit an original Bornemann EH 1024 progressing cavity pump / mono pump.
-
Placeholder
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
22
A blue stator for Bornemann EH 1024 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator for Bornemann EH 1024 progressive cavity pumps / mono pumps
Clear
11
A metal coupling rod for Bornemann EH 1024 progressive cavity pumps. It lies at an angle on a neutral white background. At the front left, one of the two joint connections is visible.
Clear
10
A metal rotor for EH 1024 pumps is tilted against a neutral background. On the left you can see the connection between the eccentric screw and the joint.
Single-stage rotor (eccentric screw) EH 1024
Clear
-
Placeholder
Small parts for attaching the rotor to the joint
216
Placeholder
The joint is pre-assembled and ready to use.
216.1
Placeholder
Small parts for mounting a joint
-
Placeholder
Contains all the parts required to replace a stuffing box / soft pack.
-
Placeholder
Spare parts to replace the mechanical seal
-
Placeholder
Stator, rotor and small parts
12
A metal drive shaft for Bornemann EH 1024 progressing cavity pumps lying at an angle with no background. The connection for the motor can be seen at the front.
Clear
1
A blue painted pump housing for a Bornemann EH 1024 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
2
A blue painted empty bearing housing for Bornemann EH 1024 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
3
Placeholder
4
Placeholder
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
15
Placeholder
14
Placeholder
17
Placeholder
18
Placeholder
20
Placeholder