Bornemann E2H 1024

For perfect view paste shortcode on a page.
Reset
add to enquiry (selected)

Pos. Thumbnail Products (click for details:) Options Product enquiry Action
-
Two blue mono pumps without motors screwed onto a wooden pallet for shipping
Replacement pump for Bornemann E2H 1024
Complete replacement pump with identical connection dimensions to an original Bornemann E2H 1024 progressing cavity pump
Clear
add to enquiry
-
Placeholder
Repair or full maintenance Bornemann E2H 1024
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
add to enquiry
22
A blue stator for Bornemann E2H 1024 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E2H 1024
Stator for Bornemann E2H 1024 progressing cavity pumps / mono pumps
Clear
add to enquiry
10
An E2H 1024 metal rotor lies across a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor E2H 1024
Rotor (eccentric screw) E2H 1024
Clear
add to enquiry
11
A coupling rod for Bornemann E2H 1024 progressing cavity pumps made of metal. It lies at an angle and you can see the connection for one of the joints on the front left.
Coupling rod E2H 1024
Clear
add to enquiry
-
Placeholder
Rotor mounting kit E2H 1024
Small parts for attaching the rotor to the joint
add to enquiry
216
The picture shows a joint for Bornemann E2H 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint E2H 1024, pre-assembled
The joint is pre-assembled and ready to use.
add to enquiry
216.1
The joint assembly kit for the Bornemann E2H 1024 contains a variety of small parts that are required for the installation of a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E2H 1024
Small parts for mounting a joint
add to enquiry
-
Placeholder
Repair kit soft pack E2H 1024
Contains all the parts required to replace a stuffing box / soft pack.
add to enquiry
-
Placeholder
Mechanical seal E2H 1024 - complete
Spare parts to replace the mechanical seal
add to enquiry
-
Placeholder
Repair kit stator + rotor E2H 1024
Stator, rotor and small parts
add to enquiry
12
A drive shaft for Bornemann E2H 1024 progressing cavity pumps made of metal
Drive shaft E2H 1024
Clear
add to enquiry
1
A pump casing for the Bornemann E2H 1024 progressive cavity pump painted in blue in front of a neutral white background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E2H 1024
add to enquiry
2
A blue painted empty bearing housing for Bornemann E2H 1024 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E2H 1024
add to enquiry
3
Placeholder
Stuffing box housing for E2H 1024
add to enquiry
4
Placeholder
Stuffing box gland for E2H 1024
add to enquiry
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
Discharge branch E2H 1024
add to enquiry
14
Placeholder
Joint boot collar E2H 1024
add to enquiry
15
Placeholder
Spacer bush E2H 1024
add to enquiry
17
Placeholder
Coupling rod pin for E2H 1024
add to enquiry
18
Placeholder
Coupling rod bushing for E2H 1024
add to enquiry
20
Placeholder
Tension rods for E2H 1024
add to enquiry
24
Placeholder
Cover sleeve for E2H 1024
add to enquiry
25
Green gaskets in a range of sizes, laid one on top of the other.
Gasket E2H 1024
add to enquiry
27
Placeholder
Ball bearing 27 for E2H 1024
add to enquiry
28
Placeholder
Ball bearing 28 for E2H 1024
add to enquiry
29
Placeholder
Spacer ring
add to enquiry
31
Placeholder
Snap ring for E2H 1024
add to enquiry
32
Placeholder
Circlip 32 for E2H 1024
add to enquiry
33
Placeholder
Circlip 33 for E2H 1024
add to enquiry
36
Placeholder
Lip seal for E2H 1024
add to enquiry
41
Placeholder
T-head bolt for E2H 1024
add to enquiry
42
Placeholder
Hexagon nut, pos. 42
add to enquiry
43
Placeholder
Lock washer 43 for E2H 1024
add to enquiry
44
Placeholder
Gland bolt 44 for E2H 1024
add to enquiry
46
Placeholder
Hexagon nut, pos. 46
add to enquiry
45
Placeholder
Gland bolt 45 for E2H 1024
add to enquiry
46.1
Placeholder
Hexagon nut, pos. 46.1
add to enquiry
47.1
Placeholder
Washer
add to enquiry
47
Placeholder
Lock washer 47 for E2H 1024
add to enquiry
49
Placeholder
Screwed plug 49 for E2H 1024
add to enquiry
50
Placeholder
Screwed plug 50 for E2H 1024
add to enquiry
51
Placeholder
Grooved gasket 51 for E2H 1024
add to enquiry
52
Placeholder
Grooved gasket 52 for E2H 1024
add to enquiry
55
Placeholder
Key for E2H 1024
add to enquiry
56
Placeholder
Soft pack for E2H 1024
add to enquiry
184
Placeholder
Grease retainer ring E2H 1024
add to enquiry
200
Placeholder
Joint head for E2H 1024
add to enquiry
68
Placeholder
V-ring for E2H 1024
add to enquiry
213
Placeholder
Joint pulley for E2H 1024
add to enquiry
214
Placeholder
Lock washer 214 for E2H 1024
add to enquiry
215
Placeholder
Zyko sleeve
add to enquiry
219
Placeholder
Set pin for E2H 1024
add to enquiry
221
Placeholder
O-ring 221 for E2H 1024
add to enquiry
222
Placeholder
O-ring 222 for E2H 1024
add to enquiry
235
Placeholder
Pump foot E2H 1024
add to enquiry
272
Placeholder
Taper pin for E2H 1024
add to enquiry
add to enquiry (selected)