Ersatzteile für Pumpen-Systeme

Home → Bornemann → EH Series → E2H → E2H 1900

E2H 1900

Showing 1–12 of 57 results

add to enquiry (selected)

1 - 12 / 12

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue-painted Fludyn BE2H 1900 progressing cavity pump / mono pump, ready for installation and mounted on a base plate. Yellow protective caps can be seen at the front and top that seal the pump during transport and prevent dirt from entering.
Fludyn BE2H 1900 mono pump
A replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* E2H 1900 progressing cavity pump
-
BEH800-1900-2
Clear
Placeholder
Repair or complete maintenance Bornemann E2H 1900
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-1900-2
A blue coloured stator made from metal with a black elastomer in the inside. Suitable for E2H 1900 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E2H 1900
The stator is Made in Germany and is available in various materials and colors.
22
BEH022-1900-2
Clear
A coupling rod made of metal for E2H 1900 progressing cavity pumps. It lies at an angle and you can see the connection for one of the joints on the front left.
Coupling rod E2H 1900
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BE2H 1900 and ITT-Bornemann E2H 1900 mono pumps.
11
BEH011-1900-2
Clear
A metallic E2H 1900 rotor lies horizontally against a neutral background. On the left, you can see the connection used to link the progressive cavity pump screw to the joint.
Rotor E2H 1900
The rotor is made in Germany and is available in a range of materials.
10
BEH010-1900-2
Clear
Placeholder
Mounting kit rotor E2H 1900
Small parts for attaching the rotor to the joint
-
BEH900-1900-2
The mounting kit joint for E2H 1900 mono pumps contains various small parts needed to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Also included are 4 metal caps, two metal pins, and two zyko sleeves.
Mounting kit joint E2H 1900
Small parts for fitting a joint
216.1
BEH2161-1900-2
The image shows a joint for E2H 1900 progressing cavity pumps. It is made of metal and is positioned diagonally against a neutral white background. The black joint boot can be seen in the center. The joint-pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint E2H 1900
The joint is pre-assembled and ready to use.
216
BEH216-1900-2
Placeholder
Repair kit soft packing E2H 1900
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-1900-2
Placeholder
Mechanical seal E2H 1900
Spare parts for replacing the mechanical seal
95
BEH095-1900-2
Placeholder
Spare parts kit stator + rotor E2H 1900
Stator, rotor and small parts
-
BEH992-1900-2
A drive shaft made of metal for E2H 1900 progressing cavity pumps
Drive shaft E2H 1900
Drive shaft suitable for Fludyn BE2H 1900 and ITT-Bornemann* E2H 1900 mono pumps (progressing cavity pumps).
12
BEH012-1900-2
Clear
add to enquiry (selected)