Mono pump / Progressing cavity pump

add to enquiry (selected)

626 - 641 / 16

26 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
The picture shows a joint for Bornemann E2L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1900-2
The picture shows the individual parts of a joint for Bornemann E2L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236-2
The picture shows the individual parts of a joint for Bornemann E2L 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2L 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.4-2
The picture shows a joint for Bornemann E2L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-2650-2
The picture shows a joint for Bornemann E2L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 375, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-375-2
The picture shows a joint for Bornemann E2L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E2L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-600-2
The picture shows a joint for Bornemann E4H 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1024-4
The picture shows a joint for Bornemann E4H 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1500-4
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E4H 164 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint E4H 164, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-164-4
The picture shows a joint for Bornemann E4H 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1900-4
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann E4H 236 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint E4H 236, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-236-4
The picture shows a joint for Bornemann E4H 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-2650-4
The picture shows a joint for Bornemann E4H 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 375, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-375-4
The picture shows a joint for Bornemann E4H 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 600, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-600-4
The picture shows a joint for Bornemann E4L 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1024-4
The picture shows a joint for Bornemann E4L 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1500-4
add to enquiry (selected)