Bornemann

ITT Bornemann

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
A blue painted Fludyn BE4H 1900 progressing cavity pump / mono pump, mounted ready for installation on a base plate. On the front and top of the pump are yellow caps that close the pump during transport to prevent dirt from entering the pump.
Replacement pump for Bornemann E4H 1900
Complete replacement pump with identical mounting dimensions to an original Bornemann E4H 1900 progressing cavity pump.
-
BEH800-1900-4
Clear
add...
Placeholder
Repair or full maintenance Bornemann E4H 1900
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
-
BEH999-1900-4
A blue stator for Bornemann E4H 1900 progressing cavity or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E4H 1900
Stator for Bornemann E4H 1900 progressing cavity pumps / mono pumps
22
BEH022-1900-4
Clear
add...
A coupling rod for Bornemann E4H 1900 progressing cavity pumps made of metal. The picture has a neutral white background. The coupling rod is at an angle and you can see one of the two connections for the joints at the front left.
Coupling rod E4H 1900
11
BEH011-1900-4
Clear
add...
An E4H 1900 rotor made of metal lies crosswise in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor E4H 1900
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
10
BEH010-1900-4
Clear
add...
Placeholder
Mounting kit rotor E4H 1900
Small parts for attaching the rotor to the joint
-
BEH900-1900-4
The picture shows a joint for Bornemann E4H 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1900-4
The mounting kit joint for Bornemann E4H 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1900
Small parts for fitting a joint
216.1
BEH2161-1900-4
Placeholder
Repair kit soft pack E4H 1900
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-1900-4
Placeholder
Mechanical seal for Bornemann E4H 1900
Spare parts for replacing the mechanical seal
95
BEH095-1900-4
Placeholder
Repair kit stator + rotor E4H 1900
Stator, rotor and small parts
-
BEH992-1900-4
A drive shaft for Bornemann E4H 1900 progressing cavity pumps made of metal, horizontal without background. On the left you can see the connection for the motor.
Drive shaft E4H 1900
12
BEH012-1900-4
Clear
add...
A blue painted pump housing for a Bornemann E4H 1900 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E4H 1900
1
BEH001-1900-4
A blue painted empty bearing housing for Bornemann E4H 1900 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E4H 1900
2
BEH002-1900-4
Placeholder
Stuffing box housing for E4H 1900
3
BEH003-1900-4
Placeholder
Stuffing box gland for E4H 1900
4
BEH004-1900-4
add to enquiry (selected)