Fludyn Pumps

Showing 369–384 of 2113 results

add to enquiry (selected)

576 - 591 / 16

24 / 1

Picture Products (click for details:) Pos SKU Options Aktion
The image shows a joint for EH 600 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 600
The joint is pre-assembled and ready to use.
216
BEH216-600-1
The image shows the individual parts of a joint for EH 6300 mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint protective sleeves. In the foreground lie a few small parts: two o-rings, two zyko sleeves, and six pointed set screws.
Joint EH 6300
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300-1
The image shows the individual components of a joint for EH 6300.1 progressing cavity pumps / mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint protective sleeves. In the foreground lie a few small parts: two o-rings, two zyko sleeves, and six pointed set screws.
Joint EH 6300.1
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300.1-1
The image shows a joint for EL 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024
The joint is pre-assembled and ready to use.
216
BEL216-1024-1
The image shows a joint for EL 1024/630 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024/630
The joint is pre-assembled and ready to use.
216
BEL216-1024-630-1
The image shows a joint for EL 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500
The joint is pre-assembled and ready to use.
216
BEL216-1500-1
The image shows a joint for EL 1500.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or drive shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500.2
The joint is pre-assembled and ready to use.
216
BEL216-1500.2-1
The image shows the individual components of a joint for EL 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-164-1
The image shows a joint for EL 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900
The joint is pre-assembled and ready to use.
216
BEL216-1900-1
The image shows a joint for EL 1900.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900.2
The joint is pre-assembled and ready to use.
216
BEL216-1900.2-1
The image shows the individual components of a joint for EL 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236-1
The image shows the individual parts of a joint for EL 236.2 mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.2
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.2-1
The image shows an assembled joint for EL 236.4 mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.4-1
The image shows a joint for EL 2650 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EL 2650
The joint is pre-assembled and ready to use.
216
BEL216-2650-1
The image shows a joint for EL 375 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or drive shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375
The joint is pre-assembled and ready to use.
216
BEL216-375-1
The image shows a joint for EL 375.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 375.2
The joint is pre-assembled and ready to use.
216
BEL216-375.2-1
add to enquiry (selected)