E2H236

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
A blue Fludyn BE2H progressing cavity pump without motor, mounted crosswise on a wooden pallet. The openings are closed with yellow caps
Replacement pump for Bornemann E2H 236
Complete replacement pump with identical mounting dimensions to an original Bornemann E2H 236 progressing cavity pump.
-
BEH800-236-2
Clear
add...
Placeholder
Repair or full maintenance Bornemann E2H 236
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
-
BEH999-236-2
A blue stator for Bornemann E2H 236 progressing cavity pumps / mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E2H 236
Stator for Bornemann E2H 236 progressing cavity pumps / mono pumps
22
BEH022-236-2
Clear
add...
A metal E2H 236 rotor lies across a neutral background. On the left you can see the connection with which the eccentric screw is connected to the joint.
Rotor E2H 236
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
10
BEH010-236-2
Clear
add...
Placeholder
Mounting kit rotor E2H 236
Small parts for attaching the rotor to the joint
-
BEH900-236-2
The picture shows the individual parts of a joint for Bornemann E2H 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E2H 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-2
Placeholder
Mounting kit joint E2H 236
Small parts for fitting a joint
216.1
BEH2161-236-2
Placeholder
Repair kit soft pack E2H 236
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-236-2
Placeholder
Mechanical seal for Bornemann E2H 236
Spare parts for replacing the mechanical seal
95
BEH095-236-2
Placeholder
Repair kit stator + rotor E2H 236
Stator, rotor and small parts
-
BEH992-236-2
A metal coupling rod for Bornemann E2H 236 progressing cavity pumps. It lies crosswise and you can see the connections for the joints on the left and right.
Coupling rod E2H 236
11
BEH011-236-2
Clear
add...
A metal drive shaft for Bornemann E2H 236 progressing cavity pumps
Drive shaft E2H 236
12
BEH012-236-2
Clear
add...
A blue painted pump housing for a Bornemann E2H 236 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E2H 236
1
BEH001-236-2
A blue painted empty bearing housing for Bornemann E2H 236 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E2H 236
2
BEH002-236-2
Placeholder
Stuffing box housing for E2H 236
3
BEH003-236-2
Placeholder
Stuffing box gland for E2H 236
4
BEH004-236-2
add to enquiry (selected)