EH1024

Bornemann EH 1024

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue Fludyn BEH 1024 mono pump without motor, including base plate mounted crosswise on a wooden pallet ready for shipping
Fludyn BEH 1024 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* EH 1024 progressing cavity pump
-
BEH800-1024-1
Clear
Placeholder
Repair or complete maintenance for Bornemann EH 1024
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-1024-1
A single-stage, blue stator for EH 1024 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 1024
The stator is Made in Germany and is available in various materials and colors.
22
BEH022-1024-1
Clear
A coupling rod made of metal for EH 1024 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 1024
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BEH 1024 and ITT-Bornemann EH 1024 mono pumps.
11
BEH011-1024-1
Clear
A metal EH 1024 rotor lies at an angle in front of a neutral background. On the left, you can see the connection that links the eccentric screw with the joint.
Rotor EH 1024
The rotor is made in Germany and is available in a range of materials.
10
BEH010-1024-1
Clear
Placeholder
Mounting kit rotor EH 1024
Small parts for attaching the rotor to the joint
-
BEH900-1024-1
The image shows a joint for EH 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1024
The joint is pre-assembled and ready to use.
216
BEH216-1024-1
The 'mounting kit joint for EH 1024 mono pumps' contains various small parts that you should replace when installing a joint or a replacement joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1024
Small parts for fitting a joint
216.1
BEH2161-1024-1
Placeholder
Repair kit soft packing EH 1024
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-1024-1
Placeholder
Mechanical seal EH 1024
Spare parts for replacing the mechanical seal
95
BEH095-1024-1
Placeholder
Spare parts kit stator + rotor EH 1024
Stator, rotor, and small parts
-
BEH992-1024-1
A drive shaft for EH 1024 progressing cavity pumps, made of metal, positioned at an angle, without a background. At the front you can see the connection for the motor.
Drive shaft EH 1024
Drive shaft suitable for Fludyn BEH 1024 and ITT-Bornemann* EH 1024 progressing cavity pumps / mono pumps.
12
BEH012-1024-1
Clear
A blue-painted pump housing for EH 1024 progressing cavity pumps against a white, neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 1024
1
BEH001-1024-1
A blue painted, empty bearing housing for EH 1024 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, you can see the opening for the drive shaft and the shaft seals.
Bearing casing EH 1024
2
BEH002-1024-1
Placeholder
Stuffing box housing EH 1024
3
BEH003-1024-1
Placeholder
Stuffing box gland EH 1024
4
BEH004-1024-1
add to enquiry (selected)