EH1500

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
Two blue Fludyn BEH 1500 progressing cavity pumps / mono pumps, without motor, bolted crosswise on a wooden pallet
Replacement pump for Bornemann EH 1500
Replacement pump with identical connection dimensions to an original Bornemann EH 1500 progressing cavity pump
-
BEH800-1500-1
Clear
add...
Placeholder
Repair or full maintenance Bornemann EH 1500
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
-
BEH999-1500-1
A blue stator for Bornemann EH 1500 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 1500
Stator for Bornemann EH 1500 progressing cavity pumps / mono pumps
22
BEH022-1500-1
Clear
add...
A metal coupling rod for Bornemann EH 1500 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 1500
11
BEH011-1500-1
Clear
add...
A metal EH 1500 rotor lies horizontally in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor EH 1500
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
10
BEH010-1500-1
Clear
add...
Placeholder
Mounting kit rotor EH 1500
Small parts for attaching the rotor to the joint
-
BEH900-1500-1
The picture shows a joint for Bornemann EH 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1500-1
The mounting kit joint for Bornemann EH 1500 contains various small parts that are required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1500
Small parts for fitting a joint
216.1
BEH2161-1500-1
Placeholder
Repair kit soft pack EH 1500
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-1500-1
Placeholder
Mechanical seal for Bornemann EH 1500
Spare parts for replacing the mechanical seal
95
BEH095-1500-1
Placeholder
Repair kit stator + rotor EH 1500
Stator, rotor and small parts
-
BEH992-1500-1
A drive shaft for Bornemann EH 1500 progressing cavity pumps made of metal, lying crosswise without background. On the left you can see the connection for the motor.
Drive shaft EH 1500
12
BEH012-1500-1
Clear
add...
A blue painted pump housing for a Bornemann EH 1500 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 1500
1
BEH001-1500-1
A blue painted empty bearing housing for Bornemann EH 1500 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for EH 1500
2
BEH002-1500-1
Placeholder
Stuffing box housing for EH 1500
3
BEH003-1500-1
Placeholder
Stuffing box gland for EH 1500
4
BEH004-1500-1
add to enquiry (selected)