EH1900

Bornemann EH 1900

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue-painted Fludyn BEH 1900 progressing cavity pump / mono pump, ready for installation, mounted on a base plate. Yellow protective caps can be seen at the front and top that seal the pump during transport and prevent dirt from entering.
Fludyn BEH 1900 mono pump
A complete pump. Suitable for example to replace an ITT-Bornemann* EH 1900 mono pump.
-
BEH800-1900-1
Clear
Placeholder
Repair or complete maintenance for Bornemann EH 19
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-1900-1
A blue coloured stator for EH 1900 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 1900
The stator is Made in Germany and available in various materials and colours.
22
BEH022-1900-1
Clear
A coupling rod made of metal for EH 1900 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 1900
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BEH 19 and ITT-Bornemann EH 19 mono pumps.
11
BEH011-1900-1
Clear
An EH 1900 metal rotor lies horizontally against a neutral background. On the left, you can see the connection that links the eccentric screw with the joint.
Rotor EH 1900
The rotor is made in Germany and is available in a range of materials.
10
BEH010-1900-1
Clear
Placeholder
Mounting kit rotor EH 1900
Small parts for attaching the rotor to the joint
-
BEH900-1900-1
The image shows a joint for EH 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint EH 1900
The joint is pre-assembled and ready to use.
216
BEH216-1900-1
The 'mounting kit joint for EH 1900 mono pumps' contains various small parts that you should replace when installing a joint or a replacement joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1900
Small parts for fitting a joint
216.1
BEH2161-1900-1
Placeholder
Repair kit soft packing EH 1900
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-1900-1
Placeholder
Mechanical seal EH 1900
Spare parts for replacing the mechanical seal
95
BEH095-1900-1
Placeholder
Spare parts kit stator + rotor EH 1900
Stator, rotor and small parts
-
BEH992-1900-1
A drive shaft for EH 1900 progressing cavity pumps, made of metal, positioned horizontally, without a background. On the left you can see the connection for the motor.
Drive shaft EH 1900
Drive shaft suitable for Fludyn BEH 1900 and ITT-Bornemann* EH 1900 progressing cavity pumps / mono pumps.
12
BEH012-1900-1
Clear
A blue-painted pump housing for EH 1900 progressing cavity pumps against a white, neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 1900
1
BEH001-1900-1
A blue painted, empty bearing housing for EH 1900 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, the opening for the drive shaft and the shaft seals is visible.
Bearing casing EH 1900
2
BEH002-1900-1
Placeholder
Stuffing box housing EH 1900
3
BEH003-1900-1
Placeholder
Stuffing box gland EH 1900
4
BEH004-1900-1
add to enquiry (selected)