EH1900

Bornemann EH 1900

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue painted Fludyn BEH 1900 progressing cavity pump / mono pump, mounted ready for installation on a base plate. On the front and top of the pump are yellow caps that close the pump during transport to prevent dirt from entering the pump.
Fludyn BEH 1900 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* EH 1900 progressing cavity pump.
-
BEH800-1900-1
Clear
Placeholder
Repair or full maintenance Bornemann EH 1900
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
-
BEH999-1900-1
A blue stator for Bornemann EH 1900 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 1900
Stator for Bornemann EH 1900 progressing cavity pumps / mono pumps
22
BEH022-1900-1
Clear
A coupling rod made of metal for EH 1900 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 1900
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BEH 1900 and ITT-Bornemann EH 1900 mono pumps.
11
BEH011-1900-1
Clear
A metal EH 1900 rotor lies horizontally in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor EH 1900
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
10
BEH010-1900-1
Clear
Placeholder
Mounting kit rotor EH 1900
Small parts for attaching the rotor to the joint
-
BEH900-1900-1
The image shows a joint for EH 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1900
The joint is pre-assembled and ready to use.
216
BEH216-1900-1
The mounting kit joint for Bornemann EH 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 1900
Small parts for fitting a joint
216.1
BEH2161-1900-1
Placeholder
Repair kit soft pack EH 1900
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-1900-1
Placeholder
Mechanical seal for Bornemann EH 1900
Spare parts for replacing the mechanical seal
95
BEH095-1900-1
Placeholder
Spare parts kit: stator + rotor EH 1900
Stator, rotor and small parts
-
BEH992-1900-1
A drive shaft for EH 1900 progressing cavity pumps, made of metal, positioned horizontally, without a background. On the left you can see the connection for the motor.
Drive shaft EH 1900
Drive shaft suitable for Fludyn BEH 1900 and ITT-Bornemann* EH 1900 progressing cavity pumps / mono pumps.
12
BEH012-1900-1
Clear
A blue painted pump housing for a Bornemann EH 1900 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 1900
1
BEH001-1900-1
A blue painted empty bearing housing for Bornemann EH 1900 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for EH 1900
2
BEH002-1900-1
Placeholder
Stuffing box housing for EH 1900
3
BEH003-1900-1
Placeholder
Stuffing box gland for EH 1900
4
BEH004-1900-1
add to enquiry (selected)