1

Single-stage

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
Three blue Fludyn BEH 600 mono pumps without motor mounted crosswise on a wooden pallet
Replacement pump for Bornemann EH 600
Complete replacement pump with the same mounting dimensions as the original Bornemann EH 600 progressing cavity pump.
-
BEH800-600-1
Clear
add...
Placeholder
Repair or full maintenance Bornemann EH 600
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-600-1
A blue stator for Bornemann EH 600 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 600
Stator for Bornemann EH 600 progressing cavity pumps / mono pumps
22
BEH022-600-1
Clear
add...
A metal coupling rod for Bornemann EH 600 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 600
11
BEH011-600-1
Clear
add...
A metal EH 600 rotor lies at an angle in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor EH 600
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
10
BEH010-600-1
Clear
add...
Placeholder
Mounting kit rotor EH 600
Small parts for attaching the rotor to the joint
-
BEH900-600-1
The picture shows a joint for Bornemann EH 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 600, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-600-1
The mounting kit joint for Bornemann EH 600 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 600
Small parts for fitting a joint
216.1
BEH2161-600-1
Placeholder
Repair kit soft pack EH 600
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-600-1
Placeholder
Mechanical seal for Bornemann EH 600
Spare parts for replacing the mechanical seal
95
BEH095-600-1
Placeholder
Repair kit stator + rotor EH 600
Stator, rotor and small parts
-
BEH992-600-1
A drive shaft for Bornemann EH 600 progressing cavity pumps made of metal lying at an angle without background. At the front you can see the connection for the motor.
Drive shaft EH 600
12
BEH012-600-1
Clear
add...
A blue painted pump housing for a Bornemann EH 600 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 600
1
BEH001-600-1
A blue painted empty bearing housing for Bornemann EH 600 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for EH 600
2
BEH002-600-1
Placeholder
Stuffing box housing for EH 600
3
BEH003-600-1
Placeholder
Stuffing box gland for EH 600
4
BEH004-600-1
add to enquiry (selected)