Spare parts for Bornemann E2H 600

We are your contact for pump spare parts made in Germany. FluDyn Pumps stands for fair prices and top service.

Select your desired spare parts from the parts list below and send us a non-binding inquiry. Of course you can put together your inquiry basket for several pump models. If you are using a Bornemann pump that is not on our list, please contact us by phone or email .

The spare parts are 100% compatible with the original parts. They are produced according to our strict specifications and offer you high quality and reliability.

add to enquiry (selected)

Pos. Thumbnail Products (click for details:) Options Product enquiry...
-
Two blue Fludyn BE2H 600 mono pumps without motor, mounted crosswise on a wooden pallet ready for despatch
Replacement pump for Bornemann E2H 600
Complete replacement pump with identical mounting dimensions to an original Bornemann E2H 600 progressing cavity pump.
add to enquiry
-
Placeholder
Repair or complete maintencen Bornemann E2H 600
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
add to enquiry
22
A blue stator for Bornemann E2H 600 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator for Bornemann E2H 600
Stator for Bornemann E2H 600 progressive cavity pumps / mono pumps
Clear
add to enquiry
11
A metal coupling rod for Bornemann E2H 600 progressive cavity pumps. It lies at an angle and the connection for one of the joints can be seen at the front left.
Coupling rod for Bornemann E2H 600
Clear
add to enquiry
10
A metal rotor for E2H 600 pumps is placed transversely in front of a neutral background. On the left is the connection that connects the rotor to the universal joint.
Rotor for Bornemann E2H 600
Two-stage rotor (eccentric screw) E2H 600
Clear
add to enquiry
-
Placeholder
Assembly kit rotor for Bornemann E2H 600
Small parts for attaching the rotor to the joint
add to enquiry
216
The picture shows a joint for Bornemann E2H 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 600, pre-assembled
The joint is pre-assembled and ready to use.
add to enquiry
216.1
The assembly kit joint for Bornemann E2H 600 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Assembly kit joint for Bornemann E2H 600
Small parts for mounting a joint
add to enquiry
-
Placeholder
Repair kit soft pack for E2H 600
Contains all the parts required to replace a stuffing box / soft pack.
add to enquiry
-
Placeholder
Mechanical seal E2H 600 - complete
Spare parts to replace the mechanical seal
add to enquiry
-
Placeholder
Repair Kit Stator + Rotor E2H 600
Stator, rotor and small parts
add to enquiry
12
A metal drive shaft for Bornemann E2H 600 progressing cavity pumps
Drive shaft for Bornemann E2H 600
Clear
add to enquiry
1
A blue painted pump housing for a Bornemann E2H 600 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing for E2H 600
add to enquiry
2
A blue painted empty bearing housing for Bornemann E2H 600 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E2H 600
add to enquiry
3
Placeholder
Stuffing box housing for E2H 600
add to enquiry
4
Placeholder
Stuffing box gland for E2H 600
add to enquiry
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
Discharge branch E2H 600
add to enquiry
14
Placeholder
Joint boot collar for E2H 600
add to enquiry
15
Placeholder
Spacer bush E2H 600
add to enquiry
17
Placeholder
Coupling rod pin for E2H 600
add to enquiry
18
Placeholder
Coupling rod bushing for E2H 600
add to enquiry
20
Placeholder
Tension rods for E2H 600
add to enquiry
24
Placeholder
Cover sleeve for E2H 600
add to enquiry
25
Green gaskets in a range of sizes, laid one on top of the other.
Gasket for E2H 600
add to enquiry
27
Placeholder
Ball bearing 27 for E2H 600
add to enquiry
28
Placeholder
Ball bearing 28 for E2H 600
add to enquiry
29
Placeholder
Spacer ring
add to enquiry
31
Placeholder
Snap ring for E2H 600
add to enquiry
32
Placeholder
Circlip 32 for E2H 600
add to enquiry
33
Placeholder
Circlip 33 for E2H 600
add to enquiry
36
Placeholder
Lip seal for E2H 600
add to enquiry
41
Placeholder
T-head bolt for E2H 600
add to enquiry
42
Placeholder
Hexagon nut, pos. 42
add to enquiry
43
Placeholder
Lock washer 43 for E2H 600
add to enquiry
44
Placeholder
Gland bolt 44 for E2H 600
add to enquiry
45
Placeholder
Gland bolt 45 for E2H 600
add to enquiry
46
Placeholder
Hexagon nut, pos. 46
add to enquiry
46.1
Placeholder
Hexagon nut, pos. 46.1
add to enquiry
47
Placeholder
Lock washer 47 for E2H 600
add to enquiry
47.1
Placeholder
Washer
add to enquiry
49
Placeholder
Screwed plug 49 for E2H 600
add to enquiry
50
Placeholder
Screwed plug 50 for E2H 600
add to enquiry
51
Placeholder
Grooved gasket 51 for E2H 600
add to enquiry
52
Placeholder
Grooved gasket 52 for E2H 600
add to enquiry
55
Placeholder
Key for E2H 600
add to enquiry
56
Placeholder
Soft pack for E2H 600
add to enquiry
68
Placeholder
V-ring for E2H 600
add to enquiry
184
Placeholder
Grease retainer ring for E2H 600
add to enquiry
200
Placeholder
Joint head for E2H 600
add to enquiry
213
Placeholder
Joint pulley for E2H 600
add to enquiry
214
Placeholder
Lock washer
add to enquiry
215
Placeholder
Zyko sleeve
add to enquiry
219
Placeholder
Set pin for E2H 600
add to enquiry
221
Placeholder
O-ring 221 for E2H 600
add to enquiry
222
Placeholder
O-ring 222 for E2H 600
add to enquiry
235
Placeholder
Pump foot for E2H 600
add to enquiry
272
Placeholder
Taper pin for E2H 600
add to enquiry
add to enquiry (selected)
add to enquiry (selected)

Pos. Thumbnail Products (click for details:) Options Product enquiry...
-
Two blue Fludyn BE2H 600 mono pumps without motor, mounted crosswise on a wooden pallet ready for despatch
Replacement pump for Bornemann E2H 600
Complete replacement pump with identical mounting dimensions to an original Bornemann E2H 600 progressing cavity pump.
add to enquiry
-
Placeholder
Repair or complete maintencen Bornemann E2H 600
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
add to enquiry
22
A blue stator for Bornemann E2H 600 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator for Bornemann E2H 600
Stator for Bornemann E2H 600 progressive cavity pumps / mono pumps
Clear
add to enquiry
11
A metal coupling rod for Bornemann E2H 600 progressive cavity pumps. It lies at an angle and the connection for one of the joints can be seen at the front left.
Coupling rod for Bornemann E2H 600
Clear
add to enquiry
10
A metal rotor for E2H 600 pumps is placed transversely in front of a neutral background. On the left is the connection that connects the rotor to the universal joint.
Rotor for Bornemann E2H 600
Two-stage rotor (eccentric screw) E2H 600
Clear
add to enquiry
-
Placeholder
Assembly kit rotor for Bornemann E2H 600
Small parts for attaching the rotor to the joint
add to enquiry
216
The picture shows a joint for Bornemann E2H 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 600, pre-assembled
The joint is pre-assembled and ready to use.
add to enquiry
216.1
The assembly kit joint for Bornemann E2H 600 contains various small parts required to install a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Assembly kit joint for Bornemann E2H 600
Small parts for mounting a joint
add to enquiry
-
Placeholder
Repair kit soft pack for E2H 600
Contains all the parts required to replace a stuffing box / soft pack.
add to enquiry
-
Placeholder
Mechanical seal E2H 600 - complete
Spare parts to replace the mechanical seal
add to enquiry
-
Placeholder
Repair Kit Stator + Rotor E2H 600
Stator, rotor and small parts
add to enquiry
12
A metal drive shaft for Bornemann E2H 600 progressing cavity pumps
Drive shaft for Bornemann E2H 600
Clear
add to enquiry
1
A blue painted pump housing for a Bornemann E2H 600 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing for E2H 600
add to enquiry
2
A blue painted empty bearing housing for Bornemann E2H 600 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E2H 600
add to enquiry
3
Placeholder
Stuffing box housing for E2H 600
add to enquiry
4
Placeholder
Stuffing box gland for E2H 600
add to enquiry
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
Discharge branch E2H 600
add to enquiry
14
Placeholder
Joint boot collar for E2H 600
add to enquiry
15
Placeholder
Spacer bush E2H 600
add to enquiry
17
Placeholder
Coupling rod pin for E2H 600
add to enquiry
18
Placeholder
Coupling rod bushing for E2H 600
add to enquiry
20
Placeholder
Tension rods for E2H 600
add to enquiry
24
Placeholder
Cover sleeve for E2H 600
add to enquiry
25
Green gaskets in a range of sizes, laid one on top of the other.
Gasket for E2H 600
add to enquiry
27
Placeholder
Ball bearing 27 for E2H 600
add to enquiry
28
Placeholder
Ball bearing 28 for E2H 600
add to enquiry
29
Placeholder
Spacer ring
add to enquiry
31
Placeholder
Snap ring for E2H 600
add to enquiry
32
Placeholder
Circlip 32 for E2H 600
add to enquiry
33
Placeholder
Circlip 33 for E2H 600
add to enquiry
36
Placeholder
Lip seal for E2H 600
add to enquiry
41
Placeholder
T-head bolt for E2H 600
add to enquiry
42
Placeholder
Hexagon nut, pos. 42
add to enquiry
43
Placeholder
Lock washer 43 for E2H 600
add to enquiry
44
Placeholder
Gland bolt 44 for E2H 600
add to enquiry
45
Placeholder
Gland bolt 45 for E2H 600
add to enquiry
46
Placeholder
Hexagon nut, pos. 46
add to enquiry
46.1
Placeholder
Hexagon nut, pos. 46.1
add to enquiry
47
Placeholder
Lock washer 47 for E2H 600
add to enquiry
47.1
Placeholder
Washer
add to enquiry
49
Placeholder
Screwed plug 49 for E2H 600
add to enquiry
50
Placeholder
Screwed plug 50 for E2H 600
add to enquiry
51
Placeholder
Grooved gasket 51 for E2H 600
add to enquiry
52
Placeholder
Grooved gasket 52 for E2H 600
add to enquiry
55
Placeholder
Key for E2H 600
add to enquiry
56
Placeholder
Soft pack for E2H 600
add to enquiry
68
Placeholder
V-ring for E2H 600
add to enquiry
184
Placeholder
Grease retainer ring for E2H 600
add to enquiry
200
Placeholder
Joint head for E2H 600
add to enquiry
213
Placeholder
Joint pulley for E2H 600
add to enquiry
214
Placeholder
Lock washer
add to enquiry
215
Placeholder
Zyko sleeve
add to enquiry
219
Placeholder
Set pin for E2H 600
add to enquiry
221
Placeholder
O-ring 221 for E2H 600
add to enquiry
222
Placeholder
O-ring 222 for E2H 600
add to enquiry
235
Placeholder
Pump foot for E2H 600
add to enquiry
272
Placeholder
Taper pin for E2H 600
add to enquiry
add to enquiry (selected)

FluDyn Pumps GmbH is neither an agent or distributor of the companies mentioned, nor is it affiliated with them. Mentioned or shown company and brand names, company and trade marks and company logos are the property of the respective manufacturer or the owner of the trade mark or rights – FluDyn Pumps GmbH only uses these for comparative purposes to identify the purchased item.

Home

Contact

Site Notice

Privacy Policy