Mono pump / Progressing cavity pump

add to enquiry (selected)

651 - 666 / 16

27 / 1

Picture Products (click for details:) Pos SKU Options Product enquiry
The picture shows the individual parts of a joint for Bornemann E4L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-164-4
The picture shows a joint for Bornemann E4L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1900-4
The picture shows the individual parts of a joint for Bornemann E4L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236-4
The picture shows a joint for Bornemann E4L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-2650-4
The picture shows a joint for Bornemann E4L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 375, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-375-4
The picture shows a joint for Bornemann E4L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint E4L 600, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-600-4
The picture shows a joint for Bornemann EH 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1024-1
The picture shows a joint for Bornemann EH 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1500-1
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 164 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man eine messingfarbene Gelenkbuchse, daneben zwei Gelenkbolzen aus Metall und rechts hinten eine schwarze Gelenkmanschette. Diese Teile stehen senkrecht vor dem weißen Hintergrund. In der vorderen Reihe sieht man links zwei liegende Sprengringe, in der Mitte zwei schwarze Zykohülsen und rechts vorne liegend zwei Gelenkschutzhülsen.
Joint EH 164, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-164-1
The picture shows a joint for Bornemann EH 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-1900-1
The picture shows the individual parts of a joint for Bornemann EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EH 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-1
The picture shows a joint for Bornemann EH 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-2650-1
The picture shows a joint for Bornemann EH 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 375, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-375-1
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 4500 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 4500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-4500-1
The picture shows a joint for Bornemann EH 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 600, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-600-1
Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 6300 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 6300, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-6300-1
add to enquiry (selected)