E4H236

Bornemann E4H 236

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue, four-stage Fludyn BE4H 236 progressing cavity pump without a motor, mounted crosswise on a wooden pallet. The openings are sealed with yellow caps.
Fludyn BE4H 236 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* E4H 236 progressing cavity pump
-
BEH800-236-4
Clear
Placeholder
Repair or full maintenance Bornemann E4H 236
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-236-4
A blue coloured stator for E4H 236 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E4H 236
The stator is Made in Germany and is available in a range of materials and colours.
22
BEH022-236-4
Clear
A coupling rod made of metal for E4H 236 progressing cavity pumps. The picture has a neutral white background. The coupling rod lies transversely, and the connections for the two joints can be seen on the sides.
Coupling rod E4H 236
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BE4H 236 and ITT-Bornemann E4H 236 mono pumps.
11
BEH011-236-4
Clear
A metal E4H 236 rotor lies at an angle in front of a neutral background. At the front left you can see the connection that connects the eccentric screw to the joint.
Rotor E4H 236
The rotor is made in Germany and is available in a range of materials.
10
BEH010-236-4
Clear
Placeholder
Mounting kit rotor E4H 236
Small parts for attaching the rotor to the joint
-
BEH900-236-4
The image shows the individual components of a joint for E4H 236 eccentric screw pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint E4H 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-4
Placeholder
Mounting kit joint E4H 236
Small parts for fitting a joint
216.1
BEH2161-236-4
Placeholder
Repair kit soft packing E4H 236
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-236-4
Placeholder
Mechanical seal E4H 236
Spare parts for replacing the mechanical seal
95
BEH095-236-4
Placeholder
Spare parts kit: stator + rotor E4H 236
Stator, rotor and small parts
-
BEH992-236-4
A drive shaft for E4H 236 progressing cavity pumps, made of metal, mounted transversely, without a background. On the left you can see the connection for the motor.
Drive shaft E4H 236
Drive shaft suitable for Fludyn BE4H 236 and ITT-Bornemann* E4H 236 progressing cavity pumps / mono pumps.
12
BEH012-236-4
Clear
A blue-painted pump housing for E4H 236 progressing cavity pumps against a white, neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing Bornemann E4H 236
1
BEH001-236-4
A blue painted, empty bearing housing for E4H 236 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, the opening for the Drive shaft and the shaft seals can be seen.
Bearing casing E4H 236
2
BEH002-236-4
Placeholder
Stuffing box housing E4H 236
3
BEH003-236-4
Placeholder
Stuffing box gland E4H 236
4
BEH004-236-4
add to enquiry (selected)