EH236

Bornemann EH 236

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A blue Fludyn BEH 236 progressing cavity pump, without motor, bolted to a somewhat old wooden pallet
Fludyn BEH 236 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* EH 236 progressing cavity pump.
-
BEH800-236-1
Clear
Placeholder
Repair or complete maintenance for Bornemann EH 236
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-236-1
A blue coloured stator for EH 236 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 236
The stator is made in Germany and is available in a range of materials and colours.
22
BEH022-236-1
Clear
A coupling rod made of metal for EH 236 progressing cavity pumps. The picture has a neutral white background. The coupling rod is positioned crosswise, and you can see the two connections for the joints on the left and right.
Coupling rod EH 236
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BEH 236 and ITT-Bornemann EH 236 mono pumps.
11
BEH011-236-1
Clear
An EH 236 rotor made of metal lies crosswise in front of a neutral background. On the left, you can see the connection that connects the eccentric screw to the joint.
Rotor EH 236
The rotor is made in Germany and is available in a range of materials.
10
BEH010-236-1
Clear
Placeholder
Mounting kit rotor EH 236
Small parts for attaching the rotor to the joint
-
BEH900-236-1
The image shows the individual components of a joint for EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint pins and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle and two joint boot collars lying on the front right.
Joint EH 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-1
Placeholder
Mounting kit joint EH 236
Small parts for fitting a joint
216.1
BEH2161-236-1
Placeholder
Repair kit soft packing EH 236
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-236-1
Placeholder
Mechanical seal EH 236
Spare parts for replacing the mechanical seal
95
BEH095-236-1
Placeholder
Spare parts kit stator + rotor EH 236
Stator, rotor, and small parts
-
BEH992-236-1
A drive shaft for EH 236 progressing cavity pumps, made of metal, positioned horizontally, without a background. On the left you can see the connection for the motor.
Drive shaft EH 236
Drive shaft suitable for Fludyn BEH 236 and ITT-Bornemann* EH 236 progressing cavity pumps / mono pumps.
12
BEH012-236-1
Clear
A blue-painted pump housing for EH 236 progressing cavity pumps, set against a neutral white background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 236
1
BEH001-236-1
A blue painted, empty bearing housing for EH 236 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, the opening for the drive shaft and shaft seals can be seen.
Bearing casing EH 236
2
BEH002-236-1
Placeholder
Stuffing box housing EH 236
3
BEH003-236-1
Placeholder
Stuffing box gland EH 236
4
BEH004-236-1
add to enquiry (selected)