EH600

Bornemann EH 600

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
Three blue Fludyn BEH 600 mono pumps without motor mounted crosswise on a wooden pallet
Fludyn BEH 600 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* EH 600 progressing cavity pump
-
BEH800-600-1
Clear
Placeholder
Repair or full maintenance Bornemann EH 600
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-600-1
A blue stator for Bornemann EH 600 progressing cavity pumps or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator EH 600
Stator for Bornemann EH 600 progressing cavity pumps / mono pumps
22
BEH022-600-1
Clear
A coupling rod made of metal for EH 600 progressing cavity pumps. It lies diagonally on a neutral white background. You can see one of the two connections for the joints at the front left.
Coupling rod EH 600
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BEH 600 and ITT-Bornemann EH 600 mono pumps.
11
BEH011-600-1
Clear
A metal EH 600 rotor lies at an angle in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor EH 600
The rotor is made in Germany and is available in a range of materials.
10
BEH010-600-1
Clear
Placeholder
Mounting kit rotor EH 600
Small parts for attaching the rotor to the joint
-
BEH900-600-1
The image shows a joint for EH 600 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 600
The joint is pre-assembled and ready to use.
216
BEH216-600-1
The 'mounting kit joint for EH 600 mono pumps' contains various small parts that you should replace when installing a joint or a replacement joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint EH 600
Small parts for fitting a joint
216.1
BEH2161-600-1
Placeholder
Repair kit soft packing EH 600
Contains all spare parts for replacing a stuffing box / soft packing.
-
BEH901-600-1
Placeholder
Mechanical seal EH 600
Spare parts for replacing the mechanical seal
95
BEH095-600-1
Placeholder
Spare parts kit: stator + rotor EH 600
Stator, rotor and small parts
-
BEH992-600-1
A drive shaft for EH 600 progressing cavity pumps, made of metal, positioned at an angle, without a background. At the front you can see the connection for the motor.
Drive shaft EH 600
Drive shaft suitable for Fludyn BEH 600 and ITT-Bornemann* EH 600 progressing cavity pumps / mono pumps.
12
BEH012-600-1
Clear
A blue-painted pump housing for EH 600 progressing cavity pumps, set against a neutral white background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing EH 600
1
BEH001-600-1
A blue painted, empty bearing housing for EH 600 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, you can see the opening for the drive shaft and the shaft seals.
Bearing casing EH 600
2
BEH002-600-1
Placeholder
Stuffing box housing for EH 600
3
BEH003-600-1
Placeholder
Stuffing box gland for EH 600
4
BEH004-600-1
add to enquiry (selected)