add to enquiry (selected)

901 - 912 / 12

37 / 1

Das Bild zeigt die Einzelteile eines Gelenks für Bornemann EH 6300.1 Exzenterschneckenpumpen / Monopumpen. Links hinten sieht man stehend zwei Gelenkbolzen aus Metall, rechts daneben eine messingfarbene Gelenkbuchse, eine schwarze Gelenkmanschette aus einer Art Gummi und davor zwei Gelenkschutzhülsen aus Metall. Im Vordergrund liegen ein paar Kleinteile: zwei O-Ringe, zwei Zyko-Hülsen und sechs spitze Gewindestifte.
Joint EH 6300.1, pre-assembled
The joint is pre-assembled and ready to use.
216
BEH216-6300.1-1
The picture shows a joint for Bornemann EL 1024 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1024-1
The picture shows a joint for Bornemann EL 1024/630 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1024/630, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1024-630-1
The picture shows a joint for Bornemann EL 1500 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1500-1
The picture shows a joint for Bornemann EL 1500.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1500.2, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1500.2-1
The picture shows the individual parts of a joint for Bornemann EL 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-164-1
The picture shows a joint for Bornemann EL 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1900-1
The picture shows a joint for Bornemann EL 1900.2 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 1900.2, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-1900.2-1
The picture shows the individual parts of a joint for Bornemann EL 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236-1
The picture shows the individual parts of a joint for Bornemann EL 236.2 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.2
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.2-1
The picture shows the individual parts of a joint for Bornemann EL 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint sleeve. These parts stand vertically in front of the white background. In the front row you can see two horizontal circlips on the left, two black cycloidal sleeves in the middle and two joint protection sleeves on the front right.
Joint EL 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.4-1
The picture shows a joint for Bornemann EL 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or PTO shaft can be seen on the left. It is also sealed with a white cap.
Joint EL 2650, pre-assembled
The joint is pre-assembled and ready to use.
216
BEL216-2650-1
add to enquiry (selected)