Joints

Showing 1–16 of 62 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
The image shows a joint for E2H 1024 progressing cavity pumps. It is made of metal and is positioned diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.
Joint E2H 1024
The joint is pre-assembled and ready to use.
216
BEH216-1024-2
The image shows a joint for E2H 1500 progressing cavity pumps. It is made of metal and is positioned at an angle against a neutral white background. The black joint boot can be seen in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E2H 1500
The joint is pre-assembled and ready to use.
216
BEH216-1500-2
The image shows the individual parts of a joint for E2H 164 mono pumps. In the back left, you can see a brass-colored joint bushing, next to it two metal joint pins, and in the back right, a black joint boot. These parts stand vertically against the white background. In the front row, you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.
Joint E2H 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-164-2
The image shows the individual parts of a joint for E2H 236 progressing cavity pumps / mono pumps. At the back left you can see a brass-colored joint bushing, next to it two metal joint pins, and at the back right a black joint boot. These parts are upright against a white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.
Joint E2H 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-2
The image shows a joint for E2H 375 progressing cavity pumps. It is made of metal and positioned at an angle against a neutral white background. The black joint boot is visible in the center. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint E2H 375
The joint is pre-assembled and ready to use.
216
BEH216-375-2
The image shows the individual parts of a joint for E2H 4500 mono pumps. In the back left, two metal joint pins are standing upright; to their right, a brass-colored joint bushing, a black joint boot made of a type of rubber, and in front of it, two metal joint boot collars. In the foreground are a few small parts: two O-rings, two zyko-sleeves, and six pointed grub screws.
Joint E2H 4500
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-4500-2
The image shows a joint for E2H 600 progressing cavity pumps. It is made of metal and lies diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint E2H 600
The joint is pre-assembled and ready to use.
216
BEH216-600-2
The image shows the individual parts of a joint for E2H 6300 progressing cavity pumps / mono pumps. At the back left, two metal joint pins are standing upright, next to them on the right a brass-colored joint bushing, a black joint boot made of a rubber-like material, and in front of them two metal joint boot collars. In the foreground are a few small parts: two O-rings, two Zyko-sleeves, and six pointed set screws.
Joint E2H 6300
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300-2
The image shows the individual parts of a joint for E2H 6300.1 progressing cavity pumps / mono pumps. At the back left, two metal joint pins are standing upright, next to them a brass-colored joint bushing, a black joint boot made of a rubber-like material, and in front two metal joint boot collars. In the foreground are a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.
Joint E2H 6300.1
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300.1-2
The picture shows a joint for E2L 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The openings for the joint pins are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.
Joint E2L 1024
The joint is pre-assembled and ready to use.
216
BEL216-1024-2
The picture shows a joint for E2L 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint E2L 1500
The joint is pre-assembled and ready to use.
216
BEL216-1500-2
The picture shows a joint for E2L 1500.4 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint E2L 1500.4
The joint is pre-assembled and ready to use.
216
BEL216-1500.4-2
The image shows the individual components of a joint for E2L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts next to it, and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.
Joint E2L 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-164-2
The image shows a joint for E2L 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.
Joint E2L 1900
The joint is pre-assembled and ready to use.
216
BEL216-1900-2
The image shows the individual components of a joint for E2L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint pins and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row, you can see two horizontal snap rings on the left, two black cyko-sleeves in the middle, and two joint boot collars lying on the front right.
Joint E2L 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236-2
The image shows the individual components of a joint for E2L 236.4 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts next to it, and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.
Joint E2L 236.4
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEL216-236.4-2
add to enquiry (selected)