Joints

Showing 33–48 of 62 results

add to enquiry (selected)

51 - 66 / 16

3 / 1

Picture Products (click for details:) Pos SKU Options Aktion
The image shows a joint for E4L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4L 2650
The joint is pre-assembled and ready to use.
216
BEL216-2650-4
The image shows a joint for E4L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod can be seen. It is also sealed with a white cap.
Joint E4L 375
The joint is pre-assembled and ready to use.
216
BEL216-375-4
The image shows a joint for E4L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint E4L 600
The joint is pre-assembled and ready to use.
216
BEL216-600-4
The image shows a joint for EH 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint EH 1024
The joint is pre-assembled and ready to use.
216
BEH216-1024-1
The image shows a joint for EH 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint EH 1500
The joint is pre-assembled and ready to use.
216
BEH216-1500-1
The image shows the individual components of a joint for EH 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two horizontal snap rings on the left, two black cycloidal sleeves in the middle and two joint boot collars on the front right.
Joint EH 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-164-1
The image shows a joint for EH 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint EH 1900
The joint is pre-assembled and ready to use.
216
BEH216-1900-1
The image shows the individual components of a joint for EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint bolts and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black cycloidal sleeves in the middle and two joint boot collars lying on the front right.
Joint EH 236
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-236-1
The image shows a joint for EH 2650 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EH 2650
The joint is pre-assembled and ready to use.
216
BEH216-2650-1
The image shows a joint for EH 375 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.
Joint EH 375
The joint is pre-assembled and ready to use.
216
BEH216-375-1
The image shows the individual components of a joint for EH 4500 progressing cavity pumps / mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.
Joint EH 4500
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-4500-1
The image shows a joint for EH 600 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.
Joint EH 600
The joint is pre-assembled and ready to use.
216
BEH216-600-1
The image shows the individual parts of a joint for EH 6300 mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.
Joint EH 6300
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300-1
The image shows the individual components of a joint for EH 6300.1 progressing cavity pumps / mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.
Joint EH 6300.1
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-6300.1-1
The image shows a joint for EL 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.
Joint EL 1024
The joint is pre-assembled and ready to use.
216
BEL216-1024-1
The image shows a joint for EL 1024/630 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint EL 1024/630
The joint is pre-assembled and ready to use.
216
BEL216-1024-630-1
add to enquiry (selected)