• English
  • German

  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
U
  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
Home / Pump manufacturers / Bornemann / Page 27

Bornemann

Showing 417–432 of 2158 results

  • The image shows the individual components of a joint for EH 6300.1 progressing cavity pumps / mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.

    Joint EH 6300.1

     ansehen...
  • The image shows a joint for EL 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.

    Joint EL 1024

     ansehen...
  • The image shows a joint for EL 1024/630 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint EL 1024/630

     ansehen...
  • The image shows a joint for EL 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint EL 1500

     ansehen...
  • The image shows a joint for EL 1500.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint EL 1500.2

     ansehen...
  • The image shows the individual components of a joint for EL 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint bolts, and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.

    Joint EL 164

     ansehen...
  • The image shows a joint for EL 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint EL 1900

     ansehen...
  • The image shows a joint for EL 1900.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint EL 1900.2

     ansehen...
  • The image shows the individual components of a joint for EL 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint bolts and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black cycloidal sleeves in the middle and two joint boot collars lying on the front right.

    Joint EL 236

     ansehen...
  • The image shows the individual parts of a joint for EL 236.2 mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint bolts, and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.

    Joint EL 236.2

     ansehen...
  • The image shows an assembled joint for EL 236.4 mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two snap rings lying on the left, two black cyclo sleeves in the middle and two joint boot collars lying on the front right.

    Joint EL 236.4

     ansehen...
  • The image shows a joint for EL 2650 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint EL 2650

     ansehen...
  • The image shows a joint for EL 375 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint EL 375

     ansehen...
  • The image shows a joint for EL 375.2 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint EL 375.2

     ansehen...
  • The image shows a joint for EL 600 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or coupling rod can be seen. It is also sealed with a white cap.

    Joint EL 600

     ansehen...
  • Placeholder

    Mounting kit joint E2L 1500

     ansehen...
  • ←
  • 1
  • 2
  • 3
  • …
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • …
  • 133
  • 134
  • 135
  • →
© 2026 FluDyn Pumps GmbH

FLUDYN PUMPS GMBH

Dankerser Str. 23
31675 Bückeburg-Cammer
Germany

Tel.:

+49 (571) 889 185 – 50

Fax:

+49 (571) 889 185 – 51

Mail:

contact@fludyn-pumps.com