• English
  • German

  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
U
  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
Home / Pump manufacturers / Bornemann / Page 24

Bornemann

Showing 369–384 of 2158 results

  • Placeholder

    Rotor Assembly Kit EH 236

     ansehen...
  • Placeholder

    Rotor Assembly Kit EH 600

     ansehen...
  • The 'mounting kit joint for EH 1500 mono pumps' contains various small parts that you should replace when installing a joint or a replacement joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.

    Assembly Kit Joint EH 1500

     ansehen...
  • The image shows a joint for E2H 1024 progressing cavity pumps. It is made of metal and is positioned diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint E2H 1024

     ansehen...
  • The image shows a joint for E2H 1500 progressing cavity pumps. It is made of metal and is positioned at an angle against a neutral white background. The black joint boot can be seen in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint E2H 1500

     ansehen...
  • The image shows the individual parts of a joint for E2H 164 mono pumps. In the back left, you can see a brass-colored joint bushing, next to it two metal joint pins, and in the back right, a black joint boot. These parts stand vertically against the white background. In the front row, you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.

    Joint E2H 164

     ansehen...
  • The image shows the individual parts of a joint for E2H 236 progressing cavity pumps / mono pumps. At the back left you can see a brass-colored joint bushing, next to it two metal joint pins, and at the back right a black joint boot. These parts are upright against a white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.

    Joint E2H 236

     ansehen...
  • The image shows a joint for E2H 375 progressing cavity pumps. It is made of metal and positioned at an angle against a neutral white background. The black joint boot is visible in the center. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint E2H 375

     ansehen...
  • The image shows the individual parts of a joint for E2H 4500 mono pumps. In the back left, two metal joint pins are standing upright; to their right, a brass-colored joint bushing, a black joint boot made of a type of rubber, and in front of it, two metal joint boot collars. In the foreground are a few small parts: two O-rings, two zyko-sleeves, and six pointed grub screws.

    Joint E2H 4500

     ansehen...
  • The image shows a joint for E2H 600 progressing cavity pumps. It is made of metal and lies diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.

    Joint E2H 600

     ansehen...
  • The image shows the individual parts of a joint for E2H 6300 progressing cavity pumps / mono pumps. At the back left, two metal joint pins are standing upright, next to them on the right a brass-colored joint bushing, a black joint boot made of a rubber-like material, and in front of them two metal joint boot collars. In the foreground are a few small parts: two O-rings, two Zyko-sleeves, and six pointed set screws.

    Joint E2H 6300

     ansehen...
  • The image shows the individual parts of a joint for E2H 6300.1 progressing cavity pumps / mono pumps. At the back left, two metal joint pins are standing upright, next to them a brass-colored joint bushing, a black joint boot made of a rubber-like material, and in front two metal joint boot collars. In the foreground are a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.

    Joint E2H 6300.1

     ansehen...
  • The picture shows a joint for E2L 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The openings for the joint pins are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint E2L 1024

     ansehen...
  • The picture shows a joint for E2L 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint E2L 1500

     ansehen...
  • The picture shows a joint for E2L 1500.4 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint E2L 1500.4

     ansehen...
  • The image shows the individual components of a joint for E2L 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts next to it, and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.

    Joint E2L 164

     ansehen...
  • ←
  • 1
  • 2
  • 3
  • …
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • …
  • 133
  • 134
  • 135
  • →
© 2026 FluDyn Pumps GmbH

FLUDYN PUMPS GMBH

Dankerser Str. 23
31675 Bückeburg-Cammer
Germany

Tel.:

+49 (571) 889 185 – 50

Fax:

+49 (571) 889 185 – 51

Mail:

contact@fludyn-pumps.com