• English
  • German

  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
U
  • Home
  • Products & Pumps
      Fludyn Monopumps / Progressing Cavity Pumps
      Marine pumps / Naval pumps
      Screw Pumps
  • Spare Parts

      We won’t let you be alone – The high-quality pump professionals

      For which pump do you need spare parts? Please select your manufacturer below.

      You can also send us an e-mail directly or call our spare parts hotline: +49 (0)571 889 185-50

      We are also pleased to repair and maintain your pump on your premises or in our workshops.
      If your pump is beyond repair, we will build you a comparable replacement pump.

      *FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

      Pump manufacturers

      Fludyn Pumps

      ITT-Bornemann*

      Upon request / available soon:

      Allweiler*

      Kampers*

      Mono Pumps*

      Netzsch*

      Seepex*

      Wangen*

  • Industries
      Oil, Gas & Petrochemistry
      Water Waste Water - Treatment
      Chemistry & Pharmaceutics
      Pulp & Paper
      Mining
      Biogas & Power Generation
      Food and Beverages
      Marine
      Industrial-, Oil- and Tank Farms
      Other Industries...
  • Service & Repairs
      Repairs & Maintenance
      Service Contracting
      Retrofit Spare Parts
  • Company
      About us
      Team
      Partner Links
      Jobs
      Contact
Home / Pump manufacturers / Bornemann / Page 26

Bornemann

Showing 401–416 of 2158 results

  • The image shows the individual components of a joint for E4L 164 progressing cavity pumps / Mono pumps. To the rear left you can see a brass-colored joint bushing, next to it two metal joint bolts, and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row, you can see two horizontal snap rings on the left, two black cyko sleeves in the middle, and two joint boot collars lying on the front right.

    Joint E4L 164

     ansehen...
  • The image shows a joint for E4L 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod can be seen. It is also sealed with a white cap.

    Joint E4L 1900

     ansehen...
  • The image shows the individual components of a joint for E4L 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint pins and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two horizontal snap rings on the left, two black cyclo sleeves in the middle and two joint boot collars on the front right.

    Joint E4L 236

     ansehen...
  • The image shows a joint for E4L 2650 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint E4L 2650

     ansehen...
  • The image shows a joint for E4L 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod can be seen. It is also sealed with a white cap.

    Joint E4L 375

     ansehen...
  • The image shows a joint for E4L 600 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.

    Joint E4L 600

     ansehen...
  • The image shows a joint for EH 1024 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The openings for the joint pins are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.

    Joint EH 1024

     ansehen...
  • The image shows a joint for EH 1500 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot can be seen. On both sides, the openings for the joint pins are sealed with yellow caps. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.

    Joint EH 1500

     ansehen...
  • The image shows the individual components of a joint for EH 164 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, two metal joint bolts and to the rear right a black joint boot. These parts stand vertically in front of the white background. In the front row you can see two horizontal snap rings on the left, two black cycloidal sleeves in the middle and two joint boot collars on the front right.

    Joint EH 164

     ansehen...
  • The image shows a joint for EH 1900 mono pumps. It is made of metal and is set diagonally against a neutral white background. The black joint boot is visible in the middle. The joint pin openings are sealed with yellow caps on both sides. On the left, the large opening for the rotor or the coupling rod is visible. It is also sealed with a white cap.

    Joint EH 1900

     ansehen...
  • The image shows the individual components of a joint for EH 236 progressing cavity pumps / mono pumps. To the rear left you can see a brass-coloured joint bushing, next to it two metal joint bolts and to the rear right a black joint boot. These parts stand vertically against the white background. In the front row you can see two horizontal snap rings on the left, two black cycloidal sleeves in the middle and two joint boot collars lying on the front right.

    Joint EH 236

     ansehen...
  • The image shows a joint for EH 2650 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. On the left, you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.

    Joint EH 2650

     ansehen...
  • The image shows a joint for EH 375 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint boot. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint EH 375

     ansehen...
  • The image shows the individual components of a joint for EH 4500 progressing cavity pumps / mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.

    Joint EH 4500

     ansehen...
  • The image shows a joint for EH 600 mono pumps. It is made of metal and is set diagonally against a neutral white background. In the middle, the black joint boot is visible. The joint pin openings are sealed with yellow caps on both sides. The large opening for the rotor or the coupling rod can be seen on the left. It is also sealed with a white cap.

    Joint EH 600

     ansehen...
  • The image shows the individual parts of a joint for EH 6300 mono pumps. At the rear left, two upright metal joint pins are visible; immediately to their right are a brass-colored joint bushing, a black joint boot made of a type of rubber, and, in front of these, two metal joint boot collars. In the foreground lie a few small parts: two O-rings, two zyko-sleeves, and six pointed set screws.

    Joint EH 6300

     ansehen...
  • ←
  • 1
  • 2
  • 3
  • …
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • …
  • 133
  • 134
  • 135
  • →
© 2026 FluDyn Pumps GmbH

FLUDYN PUMPS GMBH

Dankerser Str. 23
31675 Bückeburg-Cammer
Germany

Tel.:

+49 (571) 889 185 – 50

Fax:

+49 (571) 889 185 – 51

Mail:

contact@fludyn-pumps.com