E4H375

Bornemann E4H 375

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
Placeholder
Fludyn BE4H 375 mono pump
A complete replacement pump, suitable, for example, as a replacement for an ITT-Bornemann* E4H 375 progressing cavity pump
-
BEH800-375-4
Clear
Placeholder
Repair or complete maintenance Bornemann E4H 375
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-375-4
A blue coloured stator for E4H 375 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E4H 375
The stator is made in Germany and is available in a range of materials and colours.
22
BEH022-375-4
Clear
A coupling rod made of metal for E4H 375 progressing cavity pumps. The picture has a neutral white background. The coupling rod is positioned at an angle, and one of the two connections for the joints can be seen at the front left.
Coupling rod E4H 375
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BE4H 375 and ITT-Bornemann E4H 375 mono pumps.
11
BEH011-375-4
Clear
An E4H 375 rotor made of metal lies crosswise in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor E4H 375
The rotor is made in Germany and is available in a range of materials.
10
BEH010-375-4
Clear
Placeholder
Mounting kit rotor E4H 375
Small parts for attaching the rotor to the joint
-
BEH900-375-4
The image shows a joint for E4H 375 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The joint pin openings are sealed with yellow caps on both sides. On the left is the large opening for the rotor or coupling rod. It is also sealed with a white cap.
Joint E4H 375
The joint is pre-assembled and ready to use.
216
BEH216-375-4
The "mounting kit joint for E4H 375 mono pumps" contains various small parts that you should replace when installing a joint or a replacement joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 375
Small parts for fitting a joint
216.1
BEH2161-375-4
Placeholder
Repair kit soft packing E4H 375
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-375-4
Placeholder
Mechanical seal E4H 375
Spare parts for replacing the mechanical seal
95
BEH095-375-4
Placeholder
Spare parts kit: stator + rotor E4H 375
Stator, Rotor and small parts
-
BEH992-375-4
A drive shaft for E4H 375 progressing cavity pumps, made of metal, positioned at an angle, without a background. At the front you can see the connection for the motor.
Drive shaft E4H 375
Drive shaft suitable for Fludyn BE4H 375 and ITT-Bornemann* E4H 375 progressing cavity pumps / mono pumps.
12
BEH012-375-4
Clear
A blue-painted pump housing for E4H 375 progressing cavity pumps against a white, neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E4H 375
1
BEH001-375-4
A blue painted, empty bearing housing for E4H 375 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom, e.g. for mounting on a base plate. On the left, you can see the opening for the drive shaft and the shaft seals.
Bearing casing E4H 375
2
BEH002-375-4
Placeholder
Stuffing box housing E4H 375
3
BEH003-375-4
Placeholder
Stuffing box gland E4H 375
4
BEH004-375-4
add to enquiry (selected)