E2H164

Bornemann E2H 164

Showing 1–16 of 57 results

add to enquiry (selected)

1 - 16 / 16

1 / 1

Picture Products (click for details:) Pos SKU Options Aktion
A small blue Fludyn BE2H 164 progressing cavity pump without a motor, laid on its side on a wooden pallet
Fludyn BE2H 164 mono pump
A complete pump, suitable, for example, as a replacement for an ITT-Bornemann* E2H 164 progressing cavity pump
-
BEH800-164-2
Clear
Placeholder
Repair or complete maintenance Bornemann E2H 164
We repair and overhaul your pump completely. All wearing parts are checked and replaced or repaired as necessary.
-
BEH999-164-2
A blue coloured stator made from metal with a black elastomer in the inside. Suitable for E2H 164 mono pumps. It is lying on its side, and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E2H 164
The stator is made in Germany and is available in a range of materials and colours.
22
BEH022-164-2
Clear
An E2H 164 rotor made of metal lies crosswise in front of a neutral background. On the left, you can see the connection used to connect the progressive cavity pump rotor to the joint.
Rotor E2H 164
The rotor is made in Germany and is available in a range of materials.
10
BEH010-164-2
Clear
Placeholder
Mounting kit rotor E2H 164
Small parts for attaching the rotor to the joint
-
BEH900-164-2
The image shows the individual parts of a joint for E2H 164 mono pumps. In the back left, you can see a brass-colored joint bushing, next to it two metal joint pins, and in the back right, a black joint boot. These parts stand vertically against the white background. In the front row, you can see two horizontal snap rings on the left, two black Zyko sleeves in the middle, and two joint boot collars lying at the front right.
Joint E2H 164
We supply the joint in individual parts as it is mounted in stages on the shaft ends for this type of pump.
216
BEH216-164-2
Placeholder
Mounting kit joint E2H 164
Small parts for fitting a joint
216.1
BEH2161-164-2
Placeholder
Repair kit soft packing E2H 164
Contains all spare parts for replacing a stuffing box packing / soft pack.
-
BEH901-164-2
Placeholder
Mechanical seal E2H 164
Spare parts for replacing the mechanical seal
95
BEH095-164-2
Placeholder
Spare parts kit stator + rotor E2H 164
Stator, rotor, and small parts
-
BEH992-164-2
A coupling rod made of metal for E2H 164 progressing cavity pumps. It lies crosswise and you can see the connections for the joints on the left and right.
Coupling rod E2H 164
Made in Germany and available in various metals and grades of hardness. Suitable for Fludyn BE2H 164 and ITT-Bornemann E2H 164 mono pumps.
11
BEH011-164-2
Clear
A drive shaft made of metal for E2H 164 progressing cavity pumps
Drive shaft E2H 164
Drive shaft suitable for Fludyn BE2H 164 and ITT-Bornemann* E2H 164 mono pumps (progressing cavity pumps).
12
BEH012-164-2
Clear
A blue-painted pump housing for E2H 164 progressing cavity pumps against a white, neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E2H 164
1
BEH001-164-2
Placeholder
Bearing casing E2H 164
2
BEH002-164-2
Placeholder
Stuffing box housing E2H 164
3
BEH003-164-2
Placeholder
Stuffing box gland E2H 164
4
BEH004-164-2
add to enquiry (selected)