Spare parts for ITT-Bornemann* E4H 1900 pumps

We are your go-to supplier for pump spare parts made in Germany. FluDyn Pumps is known for its fair prices and excellent service. Our spare parts are manufactured in accordance with our strict specifications. They are made to measure and offer high quality and reliability.

Select your spare part requirements from the list below and send us a non-binding enquiry. Of course, you can compile your enquiry basket for several pump models. If anything is missing, please do not hesitate to contact us by phone or email.

Reset
add to enquiry (selected)

Pos. Picture Products (click for details:) Options Product enquiry
-
A blue painted Fludyn BE4H 1900 progressing cavity pump / mono pump, mounted ready for installation on a base plate. On the front and top of the pump are yellow caps that close the pump during transport to prevent dirt from entering the pump.
Replacement pump for Bornemann E4H 1900
Complete replacement pump with identical mounting dimensions to an original Bornemann E4H 1900 progressing cavity pump.
Clear
-
Placeholder
Repair or full maintenance Bornemann E4H 1900
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
22
A blue stator for Bornemann E4H 1900 progressing cavity or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E4H 1900
Stator for Bornemann E4H 1900 progressing cavity pumps / mono pumps
Clear
10
An E4H 1900 rotor made of metal lies crosswise in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor E4H 1900
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
Clear
11
A coupling rod for Bornemann E4H 1900 progressing cavity pumps made of metal. The picture has a neutral white background. The coupling rod is at an angle and you can see one of the two connections for the joints at the front left.
Coupling rod E4H 1900
Clear
-
Placeholder
Mounting kit rotor E4H 1900
Small parts for attaching the rotor to the joint
216
The picture shows a joint for Bornemann E4H 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1900, pre-assembled
The joint is pre-assembled and ready to use.
216.1
The mounting kit joint for Bornemann E4H 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1900
Small parts for fitting a joint
-
Placeholder
Repair kit soft pack E4H 1900
Contains all spare parts for replacing a stuffing box / soft packing.
95
Placeholder
Mechanical seal for Bornemann E4H 1900
Spare parts for replacing the mechanical seal
-
Placeholder
Repair kit stator + rotor E4H 1900
Stator, rotor and small parts
12
A drive shaft for Bornemann E4H 1900 progressing cavity pumps made of metal, horizontal without background. On the left you can see the connection for the motor.
Drive shaft E4H 1900
Clear
1
A blue painted pump housing for a Bornemann E4H 1900 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E4H 1900
2
A blue painted empty bearing housing for Bornemann E4H 1900 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E4H 1900
3
Placeholder
Stuffing box housing for E4H 1900
4
Placeholder
Stuffing box gland for E4H 1900
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
Discharge branch E4H 1900
14
Placeholder
Joint boot collar E4H 1900
15
Placeholder
Spacer bush E4H 1900
17
Placeholder
Coupling rod pin E4H 1900
18
Placeholder
Coupling rod bushing E4H 1900
20
Placeholder
Tension rods for E4H 1900
24
Placeholder
Cover sleeve E4H 1900
25
Green gaskets in a range of sizes, laid one on top of the other.
Gasket E4H 1900
27
Placeholder
Ball bearing 27 for E4H 1900
28
Placeholder
Ball bearing 28 for E4H 1900
29
Placeholder
Spacer ring
31
Placeholder
Snap ring E4H 1900
32
Placeholder
Circlip 32 for E4H 1900
33
Placeholder
Circlip 33 for E4H 1900
36
Placeholder
Lip seal for E4H 1900
41
Placeholder
T-head bolt for E4H 1900
42
Placeholder
Hexagon nut, pos. 42
43
Placeholder
Lock washer 43 for E4H 1900
44
Placeholder
Gland bolt 44 for E4H 1900
46
Placeholder
Hexagon nut, pos. 46
45
Placeholder
Gland bolt 45 for E4H 1900
46.1
Placeholder
Hexagon nut, pos. 46.1
47
Placeholder
Lock washer 47 for E4H 1900
47.1
Placeholder
Washer
49
Placeholder
Screwed plug 49 for E4H 1900
50
Placeholder
Screwed plug 50 for E4H 1900
51
Placeholder
Grooved gasket 51 for E4H 1900
52
Placeholder
Grooved gasket 52 fo E4H 1900
55
Placeholder
Key for E4H 1900
56
Placeholder
Soft pack for E4H 1900
68
Placeholder
V-ring E4H 1900
184
Placeholder
Grease retainer ring E4H 1900
200
Placeholder
Joint head E4H 1900
213
Placeholder
Joint pulley E4H 1900
214
Placeholder
Lock washer 214 for E4H 1900
215
Placeholder
Zyko sleeve 215
219
Placeholder
Set pin E4H 1900
221
Placeholder
O-ring 221 for E4H 1900
222
Placeholder
O-ring 222 for E4H 1900
235
Placeholder
Pump foot E4H 1900
272
Placeholder
Taper pin E4H 1900
add to enquiry (selected)
Reset
add to enquiry (selected)

Pos. Picture Products (click for details:) Options Product enquiry
-
A blue painted Fludyn BE4H 1900 progressing cavity pump / mono pump, mounted ready for installation on a base plate. On the front and top of the pump are yellow caps that close the pump during transport to prevent dirt from entering the pump.
Replacement pump for Bornemann E4H 1900
Complete replacement pump with identical mounting dimensions to an original Bornemann E4H 1900 progressing cavity pump.
Clear
-
Placeholder
Repair or full maintenance Bornemann E4H 1900
We repair and overhaul your pump completely. All wear parts are inspected and replaced or repaired as necessary.
22
A blue stator for Bornemann E4H 1900 progressing cavity or mono pumps. It is lying on its side and you can see the opening for the rotor on the left and the black elastomer inside.
Stator E4H 1900
Stator for Bornemann E4H 1900 progressing cavity pumps / mono pumps
Clear
10
An E4H 1900 rotor made of metal lies crosswise in front of a neutral background. On the left you can see the connection that connects the eccentric screw to the joint.
Rotor E4H 1900
Rotor suitable for Bornemann progressive cavity pumps / mono pumps. The rotor is made in Germany and available in various materials.
Clear
11
A coupling rod for Bornemann E4H 1900 progressing cavity pumps made of metal. The picture has a neutral white background. The coupling rod is at an angle and you can see one of the two connections for the joints at the front left.
Coupling rod E4H 1900
Clear
-
Placeholder
Mounting kit rotor E4H 1900
Small parts for attaching the rotor to the joint
216
The picture shows a joint for Bornemann E4H 1900 progressing cavity pumps. It is made of metal and is set diagonally against a neutral white background. In the middle you can see the black joint sleeve. The openings for the hinge pins are closed off on both sides by means of yellow caps. On the left you can see the large opening for the rotor or the coupling rod. It is also sealed with a white cap.
Joint E4H 1900, pre-assembled
The joint is pre-assembled and ready to use.
216.1
The mounting kit joint for Bornemann E4H 1900 contains various small parts that you should replace when installing or replacing a joint. The photo shows 4 rubber rings (o-rings) in two different sizes. Plus 4 metal caps, two metal pins and two zyco sleeves.
Mounting kit joint E4H 1900
Small parts for fitting a joint
-
Placeholder
Repair kit soft pack E4H 1900
Contains all spare parts for replacing a stuffing box / soft packing.
95
Placeholder
Mechanical seal for Bornemann E4H 1900
Spare parts for replacing the mechanical seal
-
Placeholder
Repair kit stator + rotor E4H 1900
Stator, rotor and small parts
12
A drive shaft for Bornemann E4H 1900 progressing cavity pumps made of metal, horizontal without background. On the left you can see the connection for the motor.
Drive shaft E4H 1900
Clear
1
A blue painted pump housing for a Bornemann E4H 1900 progressing cavity pump in front of a white neutral background. It has a round inlet opening at the bottom. Two rectangular openings on the left and right for connecting the stator and bearing assembly.
Pump casing E4H 1900
2
A blue painted empty bearing housing for Bornemann E4H 1900 progressing cavity pumps. It stands in front of a neutral white background. It has two feet at the bottom. This allows it to be mounted on a base plate, for example. On the left hand side you can see the openings for the drive shaft and the shaft seals.
Bearing casing for E4H 1900
3
Placeholder
Stuffing box housing for E4H 1900
4
Placeholder
Stuffing box gland for E4H 1900
5
A blue painted metal discharge branch. It stands vertically in front of a neutral, white background. You can look into the discharge branch at an angle from above. At the top and bottom are 4 holes which are to be used for connection screws. There is an opening on the side for a sensor. This is currently closed with a screw.
Discharge branch E4H 1900
14
Placeholder
Joint boot collar E4H 1900
15
Placeholder
Spacer bush E4H 1900
17
Placeholder
Coupling rod pin E4H 1900
18
Placeholder
Coupling rod bushing E4H 1900
20
Placeholder
Tension rods for E4H 1900
24
Placeholder
Cover sleeve E4H 1900
25
Green gaskets in a range of sizes, laid one on top of the other.
Gasket E4H 1900
27
Placeholder
Ball bearing 27 for E4H 1900
28
Placeholder
Ball bearing 28 for E4H 1900
29
Placeholder
Spacer ring
31
Placeholder
Snap ring E4H 1900
32
Placeholder
Circlip 32 for E4H 1900
33
Placeholder
Circlip 33 for E4H 1900
36
Placeholder
Lip seal for E4H 1900
41
Placeholder
T-head bolt for E4H 1900
42
Placeholder
Hexagon nut, pos. 42
43
Placeholder
Lock washer 43 for E4H 1900
44
Placeholder
Gland bolt 44 for E4H 1900
46
Placeholder
Hexagon nut, pos. 46
45
Placeholder
Gland bolt 45 for E4H 1900
46.1
Placeholder
Hexagon nut, pos. 46.1
47
Placeholder
Lock washer 47 for E4H 1900
47.1
Placeholder
Washer
49
Placeholder
Screwed plug 49 for E4H 1900
50
Placeholder
Screwed plug 50 for E4H 1900
51
Placeholder
Grooved gasket 51 for E4H 1900
52
Placeholder
Grooved gasket 52 fo E4H 1900
55
Placeholder
Key for E4H 1900
56
Placeholder
Soft pack for E4H 1900
68
Placeholder
V-ring E4H 1900
184
Placeholder
Grease retainer ring E4H 1900
200
Placeholder
Joint head E4H 1900
213
Placeholder
Joint pulley E4H 1900
214
Placeholder
Lock washer 214 for E4H 1900
215
Placeholder
Zyko sleeve 215
219
Placeholder
Set pin E4H 1900
221
Placeholder
O-ring 221 for E4H 1900
222
Placeholder
O-ring 222 for E4H 1900
235
Placeholder
Pump foot E4H 1900
272
Placeholder
Taper pin E4H 1900
add to enquiry (selected)

*FluDyn Pumps GmbH does not supply original parts here and is neither a representative nor a dealer for the companies mentioned, nor is it affiliated with them. Any company names, brand names, trademarks and company logos mentioned or displayed are the property of the respective manufacturer or the trademark or rights holder. – FluDyn Pumps GmbH verwendet diese lediglich zur Identifizierung und Zuordnung der angebotenen Waren.

Home

Contact

Site Notice

Privacy Policy